im in the prosses of getting my 8 x 6 greenhouse set up to move up my allotment and im putting the 6mm pollycarb panels in it and im going to run some metal strips horizontly top and bottom of the panels and drill through and secure bolts with 4cm washers to stop them flexing and popping out ,as for the base i have 15cm x 15 cm wood post that i will screw the greenhouse too and then im thinking of knocking a 2 foot dexion bar in the ground like a tent peg on each corner ,sorry if this sounds abit confusing as its abit difficult to describe in words i`ll take some pics when its all built and hopfully you`ll see what i mean ,cheers
also dave from daves allotment on you tube is just finishing putting his new rather splendid greenhouse up might be worth a watch for a few ideas ,cheers
also dave from daves allotment on you tube is just finishing putting his new rather splendid greenhouse up might be worth a watch for a few ideas ,cheers
You can treat it as a big box of mechano if you want - you may have to cut, file, drill and hammer struts to the right length (I'm assuming that the vertical struts would need to be cut down) You'd have to work out how to get at your plants inside - unless you are going to crawl through the shortened door opening on yer belly.
It would make a fine sail if it weren't bolted down. I would have prefered glass, but I got it in the B&Q clearance and I'm surprised at how good it is. I was fully ready to be a bit disappointed, or to regularly have to pop panels back in. So far only 2 panels have popped out - one per winter.
Comment