Announcement

Collapse
No announcement yet.

How to take wooden pallets apart?

Collapse

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to take wooden pallets apart?

    Hiya,
    I got offered some wooden pallets. Now we only have a hatchback, so I don't think I'll be able to fit them whole and will need to taken them apart, probably in my lunchbreak.

    A colleague is giving me a crowbar, I have a clawhammer at home, but I am not sure if I am going to be strong enough to pull them apart nor whether I am going to be skilled enough not to break them.

    anybody got any advice or experience they would share?
    http://onegardenersadventures.blogspot.com/ updated 10-03-2010 with homebrew pics & allotment pics

  • #2
    I read an article about exactly that not too long ago... I'm not sure where it was though.

    In short the idea was to knock a chisel between the slats and the bearers (the bearers are the chunky blocks that hold it all together) and lever them apart.
    Some slats will break, but with the right approach you can salvage the wood AND the staples so you can tap them in with a hammer when you're making whatever they are earmarked for.

    Another slightly less gentle approach was to use an old chisel and basically smack it through the staples. That means no salvaged staples to re-use but it's probably a bit easier to do.

    I'd rather try that with a lump hammer than a claw hammer though.

    The only time I've taken pallets apart so far has been a somewhat destructive approach as they were destined to become kindling for our woodburners. I'll be trying one of the above methods soon though as I'm going to need loads of wood to make paths, beds, compost bins and stuff.
    Last edited by organic; 12-03-2010, 04:50 PM.

    Comment


    • #3
      How about asking a friend with a van to collect them for you. Then when you get back to the plot, ask if they can take them to bits for you as well. I've been suckered into that one on more than a few occasions!
      http://norm-foodforthought.blogspot.com/

      If it ain't broke, don't fix it and if you ain't going to eat it, don't kill it

      Comment


      • #4
        I take the pallets apart by turning them on the side and hitting the blocks with a big hammer or the flat side of a small axe untill the block comes away from the planks.
        ---) CARL (----
        ILFRACOMBE
        NORTH DEVON

        a seed planted today makes a meal tomorrow!

        www.freewebs.com/carlseawolf

        http://mountain-goat.webs.com/

        now in blog form ! UPDATED 15/4/09

        Comment


        • #5
          thats quite difficult,they use those nasty long staple things,and they are made to be quite tough,use the crow bar as a lever after knocking it into the joins with the hammer,just mind ya pinkies!!
          totally mad on growing veg and keeping bantams!!!!

          Comment


          • #6
            This thread may be of some interest.. http://www.growfruitandveg.co.uk/gra...ets_43666.html

            Comment


            • #7
              Pallets are buggers to split!The nails/staples they use have very small heads (so you can't get a clawhammer to rip them out) and they are ridged to resist working themselves out!

              A chap on my site has a van and electric band saw and he's split his into perfect boards!
              My 2014 No Dig Allotment
              My 2013 No Dig Allotment
              My 2012 No Dig Allotment
              My 2011 No Dig Allotment

              Comment


              • #8
                Pallets are not intended to be taken apart, they are designed to withstand rough use in factories and warehouses; so taking them apart needs something a bit heavier than the average household tools. They are often held together by serrated nails and inserted by a machine below the surface of the wood so they don't damage the goods on the pallet
                The best combination of tools I've found is an 18" or 24" crowbar and a 1 and a half or 2 pound lump hammer or ball pein hammer. Put a piece of pallet wood under the crowbar for extra height and leverage
                Pallet wood is poor quality and roughly sawn so use gloves to handle it
                If you have to buy a saw for the job get a cheap hardpoint or toolbox saw

                Comment


                • #9
                  Originally posted by carlseawolf View Post
                  I take the pallets apart by turning them on the side and hitting the blocks with a big hammer or the flat side of a small axe untill the block comes away from the planks.
                  Ditto!!!!!
                  My Majesty made for him a garden anew in order
                  to present to him vegetables and all beautiful flowers.- Offerings of Thutmose III to Amon-Ra (1500 BCE)

                  Diversify & prosper


                  Comment


                  • #10
                    Originally posted by carlseawolf View Post
                    I take the pallets apart by turning them on the side and hitting the blocks with a big hammer or the flat side of a small axe untill the block comes away from the planks.
                    Be VERY VERY VERY careful doing that...

                    While the poll of an axe can make for a useful hammer - the sharp blade pointing at your face is a very good way to slice your head in two.

                    Do the sensible thing and use a lump hammer instead - much better to get blunt trauma to the face than to actually embed an axe in it.

                    Comment


                    • #11
                      Originally posted by carlseawolf View Post
                      I take the pallets apart by turning them on the side and hitting the blocks with a big hammer or the flat side of a small axe untill the block comes away from the planks.
                      Same here works for me until you get the ones with those horrible fixings!
                      http://greengas-ourallotment.blogspot.com/

                      Comment


                      • #12
                        Find a man with a van and buy him a beer....pallets arrive whole....no splinters, no axe in the forehead, no grief....job jobbed.

                        Must have missed Norm's post...He's your man!
                        Last edited by Paulottie; 14-03-2010, 08:57 PM.

                        Comment


                        • #13
                          I strip pallets for a living in a pallet yard with a machine,anyway a quick way is wait till they are wet and use a length of wood as a lever and prise them apart slowly,when they are wet the nails pull thru the wood.

                          Comment


                          • #14
                            Not a job that I have done, but I think I would just saw through the planks leaving the end chunky bits to use as uprights or something.

                            “If your knees aren't green by the end of the day, you ought to seriously re-examine your life.”

                            "What lies behind us and what lies before us are tiny matters compared to what lies within us." Ralph Waldo Emerson

                            Charles Churchill : A dog will look up on you; a cat will look down on you; however, a pig will see you eye to eye and know it has found an equal
                            .

                            Comment


                            • #15
                              You shouldn't use the back of an axe head as a hammer. The curved shape of an axe shaft is designed to be stronger in one direction, ie when cutting, and to absorb shocks. If you use it in the reverse direction you are liable to split the shaft

                              Comment

                              Latest Topics

                              Collapse

                              Recent Blog Posts

                              Collapse
                              Working...
                              X