Announcement

Collapse
No announcement yet.

Brick veg patches/retaining walls - does the inside face of bricks need protection?

Collapse

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brick veg patches/retaining walls - does the inside face of bricks need protection?

    Hi all

    I've just finished making a low brick wall veg patch....

    Now that it is done, I'm wondering (before putting the soil back) whether it would make sense to protect the bricks where the soil will rest against them. If so, what should I use? The garden is going to be organic, so I'd prefer to stay away from anything that will leach nasties into the soil. In all honesty, I'd rather use nothing. But if it will help the wall to last longer, then I'm happy to protect.

    Cheers

    Max





    Attached Files

  • #2
    Bricks will be fine, many house have bricks in the ground for decades.

    Comment


    • #3
      Hi

      Thanks for the quick response. Funnily enough I did think that myself to begin with. But I'm not sure whether the bricks used in building that go underground are different to those used above ground?

      I'm also not sure what type of bricks mine are as they were reclaimed. They've be sat behind my in-law's shed for the last 40 years or so. And before that they were used as the floor/bottom part of a community greenhouse apparently.

      Cheers

      Comment


      • #4
        Here's a close up of the bricks:

        Attached Files

        Comment


        • #5
          Max! a bricks a brick! They'll be fine! Now if wood! Would be an entirely a different story!
          "Knowledge is knowing a tomato is a fruit, wisdom is knowing not to put it in a fruit salad"

          Comment


          • #6
            Your right about different bricks 'blues' are impervious to water so used for damp courses as an example. Having said that unless you have plans to leave it to your great, great grandchildren I wouldn't worry to much.
            Potty by name Potty by nature.

            By appointment of VeggieChicken Member of the Nutters club.


            We hang petty thieves and appoint great ones to public office.

            Aesop 620BC-560BC

            sigpic

            Comment


            • #7
              Hi

              Just resurrecting this thread as there has been a slight change of plan....

              Thanks for the previous replies first of all....

              The new plan is to finish off the triangular bed with wood (along the unfinished length; see photos). What can I use to protect the wood? I was thinking of using some of the damp proof plastic rolls you can get, or some pond liner, or some other black plastic. Are there any other options? What would be the most effective and the cheapest?

              Many thanks

              Max
              Last edited by Russel Sprout; 25-08-2016, 06:07 PM.

              Comment


              • #8
                If you haven't already got the wood buy 'pressure treated' timber, perfectly safe nowadays and will last for years.

                Other wise line with plastic, even old compost bags stuck together will do the job.
                Potty by name Potty by nature.

                By appointment of VeggieChicken Member of the Nutters club.


                We hang petty thieves and appoint great ones to public office.

                Aesop 620BC-560BC

                sigpic

                Comment


                • #9
                  I prefer to use 2 or 3 coats of creocote/creosote (even if the timber has been treated) then line with plastic/membrane as suggested above.

                  Depending on the size, I use either old compost bags (using a staple gun to secure) or pond membrane as you've proposed. For my next project I'm looking into using damp-proof course membrane, mostly a question of sizeprice.

                  Comment


                  • #10
                    Hi there

                    I had to put this project on hold for various reasons but am now getting back onto it. I think I'll use the damp-proof course rolls. So far Toolstation seem to be the best in terms of price.

                    Good luck with yours.

                    Comment

                    Latest Topics

                    Collapse

                    Recent Blog Posts

                    Collapse
                    Working...
                    X